Products products


您现在所在的位置Home > Products > 5T/D Waste Tyre Pyrolysis Plant

5T/D Waste Tyre Pyrolysis Plant

5T/D Waste Tyre Pyrolysis Plant

5T/D Waste Tyre Pyrolysis Plant is mainly used for waste tire pyrolysis recycling, solve the problem of black pollution, can from waste tires, waste rubber tyre oil and other organic solid waste production, is currently one of the main ways of discarded tires, this plant can achieve every 5 tons of tires processing, can be customized according to customer’s own demand.

Part of 5T/D Waste Tyre Pyrolysis Plant:
*Horizontal Rotation Cracking Furnace
*Water Seal System
*Multi-Stage Separator
*Static And Dynamic Seals
*Distillation Column
*Efficient Atomization Desulfurization Dust-Removal Device
Production Process:

Waste tyre pyrolysis plant production process
Final Products:

Final Products of 5T/D Waste Tyre Pyrolysis Plant include 45% tire oil, 35% carbon black; 12-15% steel wire; 5-8%. Tire oil is also called fuel oil, can be directly sold (they are also used for processing or used for boiler combustion, bath center, restaurants, burning fuels such as floor brick) or deep processing into organic solvent with refining equipment and automotive fuel, etc.

Technology Characteristics:

1.The process design is reasonable, advanced manufacturing technology, high degree of automation, complete safety facility;

2.Adopting micro negative pressure rotary cracking kettle, heated evenly, pyrolysis fast, high oil yield, on gas spillover;

3.Adopt efficient coal, fuel and non-condensable gas mixed fuel heating system, the system of flue gas via strong atomized dust remover and industrial waste gas purifier process after discharge can reach the national pollution-free emissions standards, the complete set of device environmental effect can achieve the european and American highest standard and also approved by American EPI environmental protection certification;

4.Oil and gas cooling system adopt cooling tower indirect cooling way, this is our company’s mature technology, especially suitable for oil and gas cooling and heating oil recovery;

5.Non-condensable gas during refining process, can be directly as pyrolysis reactor fuel combustion chamber, greatly save the fuel energy;

6.After pyrolysis produced carbon black can be comprehensive utilizating effectively, and meet the national EPC quality certification

7.This process not only is suitable for dealing with waste rubber and waste plastic, waste tires, straw, acrylic small particles shale waste can also processing, at the same time can also be applied to sludge and oil field waste.

Related Parameters:

Model Reactor Size Stucture Capacity Running pressure Reactor Rotating Speed Power
TF-5 1.5×6.6M Horizontal Rotary 5T/D Micro negative pressure 0.4turn/min 16kw

If you have any requirement or suggestion, please fill in the form and send to us, thanks!