YOUR POSITION : Home > News > Maintenance of waste tire processing equipment

Maintenance of waste tire processing equipment

Times:2020-11-16   Author:zhengyangtire

In the rubber powder sales market where market competition is particularly fierce, it is no accident that waste tire processing equipment can be favored by customers. The advent of this product has not only made up for the vacancy of Chinese machinery and equipment, but also set a precedent in the machinery manufacturing technology innovation industry.

Put the equipment into the container

People who often use waste tire processing equipment should have a better grasp of some common problems in the application of the equipment. If the equipment is not used for long-term storage, there are also many common problems. In order to better ensure that the waste tire processing equipment is in the In the whole process of later application, it can run normally, and we still need to pay attention to it during storage.

1. When the waste tire processing equipment is taken out from the storage place, the first thing we need to do is to check the paint condition of the equipment. If any problem is found, it must be solved immediately. Remember to do the relevant work before installing the machine. Anti-corrosion treatment.

2. If the water pump flywheel has been removed from the camshaft, the surface between the water pump flywheel and the shaft should be coated with additives.

3. The waste tire processing equipment and the removed components should be stored in a firm support frame to avoid contact with the road.

4. During the storage period or periodical shutdown period of the waste tire processing equipment, let the shredder operate at least once a month to ensure that the rolling bearings are properly lubricated. If the rubber powder machine cannot be actually operated during the entire storage process, it is necessary to manually rotate the water pump flywheel of the rubber powder machine 3 to 4 times to ensure that the rolling bearing is properly lubricated.

According to our understanding, before long-term storage of waste tire processing equipment, we must disassemble some of the key components on the equipment, and carry out maintenance work on these parts on time. This is to ensure that the waste tire processing equipment can be used in the middle and late stages. Prerequisite for normal application.

If you have any requirement or suggestion, please fill in the form and send to us, thanks!