Professional tire rubber powder production equipment

The waste tire granulator is a combination of two processes of tire decomposition and crushing to process waste tires into granules. It only needs two people to operate. The use value of rubber granules is extremely high and the profit is huge. It is widely used in rubber floor tiles, regeneration Rubber factories, waterproof coil factories, rubber runways, rubber product factories, etc., this equipment can be tested on the spot to provide sales.

Product advantages: This set of equipment occupies a small area, less investment, low energy consumption, green and pollution-free, and the whole set of equipment has a high degree of automation.

Operation process: waste tires→circle cutting machine→strip cutting machine→block cutting machine→conveyor→coarse crusher→conveyor→secondary crusher→conveyor magnetic separator→granulator→cyclone magnetic separator→(screening machine)→ Inspection→Storage

The blockage of the pulverizer is one of the common faults in the use of the pulverizer. There may be problems in the design of the tool, but it is more caused by improper operation.

If the feeding speed is too fast, the load will increase and cause blockage. During the feeding process, pay attention to the large deflection angle of the pointer of the ammeter at any time. If the current exceeds the rated current, it indicates that the motor is overloaded. If it is overloaded for a long time, it will burn out the motor. In this case, the material door should be reduced or closed immediately, and the feeding method can also be changed, and the feeding amount can be controlled by increasing the feeder. Due to the high speed of the pulverizer, the large load, and the strong fluctuation of the load. Therefore, the current of the pulverizer is generally controlled at about 85% of the rated current.