Waste tire processing production line

The old tire processing production line is a large-scale complete set of equipment that completely separates the three major raw materials contained in the tire: rubber, steel wire, and fiber at room temperature, and realizes 100% recycling. The waste tire processing production line can recycle tires within the diameter range of 400-3000mm according to customer requirements. It has strong applicability, the output size can be controlled within the range of 5-100mm, and the output can reach 200-10000kg/h. The production line operates at room temperature without any chemical additives and will not cause secondary pollution to the environment. The production line adopts PLC control system, which is easy to operate and maintain, and has the characteristics of low energy consumption and long service life.

Features of the production line 1. The whole tire is put into the tire directly without pre-breaking and pulling the steel ring.

2. From the whole tire to 1-7mm particles, the whole process of production and packaging, there is no intermediate link of secondary handling.

3. The maximum processing capacity is 5000kg/h, and only 7 people at most can complete all on-site operations.

4. Configure the equipment model according to the customer’s output demand, 200kg/h-10000kg/h, with a wide range of choices.

5. The fully combined two-layer structure makes installation, replacement and maintenance more convenient and safer.

6. Seamless connection, full monitoring of dust and smoke.

7. Adhere to the feeding experiment of 80-100 hours before the single machine leaves the factory to ensure stable performance.

8. CE certification, unified standards, focus on craftsmanship.